Line Boring Honing

At Foxwood Diesel we have become specialists in boring and honing Cylinder Blocks.

Our line boring machine

The pictures on the right shows the machine that we use for line boring and honing. The idea behind the method is to shave the metal off the inside of the bores so we are ultimately able to resize the bore to the required dimensions. With our technique we are able to give a clean finish to the desired engine part.

The reason we line bore engine blocks is too restore them to their full working standard. Line boring and honing is done in our Foxwood Diesel workshop by our specialists who are able hone the block to accept either a standard sized or oversized bearing.

 

We can bore cylinder blocks all the way to the small blocks shown on the left, to big cylidner blocks shown on the right. We can bore blocks any size up to 2540mm / 100 Inches!

Line boring on a small engine block line boring and honing on a large engine block

If you have any questions regarding our services then please don’t hesitate to call us on 01246 260199

Contact Us

Foxwood Diesel
Unit 17, Whitting Valley Road,
Old Whittington, Chesterfield.
S41 9EY

Tel: (01246) 260199
To email click here